diff --git a/MD/基于kubeadm部署kubernetes集群.md b/MD/基于kubeadm部署kubernetes集群.md
index cc91289..eabccc4 100644
--- a/MD/基于kubeadm部署kubernetes集群.md
+++ b/MD/基于kubeadm部署kubernetes集群.md
@@ -1,217 +1,229 @@
-<h1><center>基于kubeadm部署kubernetes集群</center></h1>
-
-著作：行癫  <盗版必究>
-
-------
-
-## 一：环境准备
-
-三台服务器，一台master，两台node,master节点必须是2核cpu
-
-| 节点名称 |   IP地址   |
-| :------: | :--------: |
-|  master  | 10.0.0.220 |
-|  node-1  | 10.0.0.221 |
-|  node-2  | 10.0.0.222 |
-|  node-3  | 10.0.0.223 |
-
-#### 1.所有服务器关闭防火墙和selinux
-
-```shell
-[root@localhost ~]# systemctl stop firewalld
-[root@localhost ~]# systemctl disable firewalld
-[root@localhost ~]# setenforce 0
-[root@localhost ~]# sed -i '/^SELINUX=/c SELINUX=disabled/' /etc/selinux/config
-[root@localhost ~]# swapoff -a　　临时关闭
-[root@localhost ~]# sed -i 's/.*swap.*/#&/' /etc/fstab　永久关闭
-注意：
-	关闭所有服务器的交换分区
-	所有节点操作
-```
-
-#### 2.保证yum仓库可用
-
-```shell
-[root@localhost ~]# yum clean all
-[root@localhost ~]# yum makecache fast
-注意：
-	使用国内yum源
-	所有节点操作
-```
-
-#### 3.修改主机名
-
-```shell
-[root@localhost ~]# hostnamectl set-hostname master
-[root@localhost ~]# hostnamectl set-hostname node-1
-[root@localhost ~]# hostnamectl set-hostname node-2
-[root@localhost ~]# hostnamectl set-hostname node-3
-注意：
-	所有节点操作
-```
-
-#### 4.添加本地解析
-
-```shell
-[root@master ~]# cat >> /etc/hosts <<eof
-10.0.0.220 master
-10.0.0.221 node-1
-10.0.0.222 node-2
-10.0.0.223 node-3
-eof
-注意：
-	所有节点操作
-```
-
-#### 5.安装容器
-
-```shell
-[root@master ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
-[root@master ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
-[root@master ~]# yum -y install docker-ce
-[root@master ~]# systemctl start docker
-[root@master ~]# systemctl enable docker
-注意：
-	所有节点操作
-```
-
-#### 6.安装kubeadm和kubelet
-
-```shell
-[root@master ~]# cat >> /etc/yum.repos.d/kubernetes.repo <<eof
-[kubernetes]
-name=Kubernetes
-baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
-enabled=1
-gpgcheck=0
-repo_gpgcheck=0
-gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
-eof
-[root@master ~]# yum -y install kubeadm  kubelet  kubectl ipvsadm
-注意：
-	所有节点操作
-	这里安装的是最新版本（也可以指定版本号：kubeadm-1.19.4）
-```
-
-#### 7.配置kubelet的cgroups
-
-```shell
-[root@master ~]#　cat >/etc/sysconfig/kubelet<<EOF
-KUBELET_EXTRA_ARGS="--cgroup-driver=cgroupfs --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.1"
-EOF
-k8s.gcr.io/pause:3.6
-```
-
-#### 8.加载内核模块
-
-```shell
-[root@master ~]# modprobe br_netfilter
-注意：
-	所有节点操作
-```
-
-#### 9.修改内核参数
-
-```shell
-[root@master ~]#　cat >> /etc/sysctl.conf <<eof
-net.bridge.bridge-nf-call-ip6tables = 1
-net.bridge.bridge-nf-call-iptables = 1
-vm.swappiness=0
-eof
-[root@master ~]# sysctl -p
-net.bridge.bridge-nf-call-ip6tables = 1
-net.bridge.bridge-nf-call-iptables = 1
-vm.swappiness = 0
-注意：
-	所有节点操作
-```
-
-## 二：部署Kubernetes
-
-#### 1.镜像下载
-
-```shell
-https://www.xingdiancloud.cn/index.php/s/6GyinxZwSRemHPz
-注意：
-	下载后上传到所有节点
-```
-
-#### 2.镜像导入
-
-```shell
-[root@master ~]# cat image_load.sh
-#!/bin/bash
-image_path=`pwd`
-for i in `ls "${image_path}" | grep tar`
-do
-        docker load  < $i
-done
-[root@master ~]# bash image_load.sh
-注意：
-	所有节点操作
-```
-
-#### 3.master节点初始化
-
-```shell
-[root@master ~]# kubeadm init --kubernetes-version=1.23.1 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=10.0.0.220
-
-Your Kubernetes control-plane has initialized successfully!
-
-To start using your cluster, you need to run the following as a regular user:
-
-  mkdir -p $HOME/.kube
-  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
-  sudo chown $(id -u):$(id -g) $HOME/.kube/config
-
-Alternatively, if you are the root user, you can run:
-
-  export KUBECONFIG=/etc/kubernetes/admin.conf
-
-You should now deploy a pod network to the cluster.
-Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
-  https://kubernetes.io/docs/concepts/cluster-administration/addons/
-
-Then you can join any number of worker nodes by running the following on each as root:
-
-kubeadm join 10.0.0.220:6443 --token mzrm3c.u9mpt80rddmjvd3g \
-        --discovery-token-ca-cert-hash sha256:fec53dfeacc5187d3f0e3998d65bd3e303fa64acd5156192240728567659bf4a
-```
-
-#### 4.安装pod插件
-
-```shell
-[root@master ~]# wget http://www.xingdiancloud.cn:92/index.php/s/3Ad7aTxqPPja24M/download/flannel.yaml
-[root@master ~]# kubectl create -f flannel.yaml
-```
-
-#### 5.将node加入工作节点
-
-```shell
-[root@node-1 ~]# kubeadm join 10.0.0.220:6443 --token mzrm3c.u9mpt80rddmjvd3g --discovery-token-ca-cert-hash sha256:fec53dfeacc5187d3f0e3998d65bd3e303fa64acd5156192240728567659bf4a
-注意：
-这里使用的是master初始化产生的token
-这里的token时间长了会改变，需要使用命令获取，见下期内容
-没有记录集群 join 命令的可以通过以下方式重新获取:
-kubeadm token create --print-join-command --ttl=0
-```
-
-#### 6.master节点查看集群状态
-
-```shell
-[root@master ~]# kubectl get nodes
-NAME     STATUS   ROLES                  AGE     VERSION
-master   Ready    control-plane,master   26m     v1.23.1
-node-1   Ready    <none>                 4m45s   v1.23.1
-node-2   Ready    <none>                 4m40s   v1.23.1
-node-3   Ready    <none>                 4m46s   v1.23.1
-```
-
-
-
-
-
-
-
-
-
+<h1><center>基于kubeadm部署kubernetes集群</center></h1>
+
+著作：行癫  <盗版必究>
+
+------
+
+## 一：环境准备
+
+三台服务器，一台master，两台node,master节点必须是2核cpu
+
+| 节点名称 |   IP地址   |
+| :------: | :--------: |
+|  master  | 10.0.0.220 |
+|  node-1  | 10.0.0.221 |
+|  node-2  | 10.0.0.222 |
+|  node-3  | 10.0.0.223 |
+
+#### 1.所有服务器关闭防火墙和selinux
+
+```shell
+[root@localhost ~]# systemctl stop firewalld
+[root@localhost ~]# systemctl disable firewalld
+[root@localhost ~]# setenforce 0
+[root@localhost ~]# sed -i '/^SELINUX=/c SELINUX=disabled/' /etc/selinux/config
+[root@localhost ~]# swapoff -a　　临时关闭
+[root@localhost ~]# sed -i 's/.*swap.*/#&/' /etc/fstab　永久关闭
+注意：
+	关闭所有服务器的交换分区
+	所有节点操作
+```
+
+#### 2.保证yum仓库可用
+
+```shell
+[root@localhost ~]# yum clean all
+[root@localhost ~]# yum makecache fast
+注意：
+	使用国内yum源
+	所有节点操作
+```
+
+#### 3.修改主机名
+
+```shell
+[root@localhost ~]# hostnamectl set-hostname master
+[root@localhost ~]# hostnamectl set-hostname node-1
+[root@localhost ~]# hostnamectl set-hostname node-2
+[root@localhost ~]# hostnamectl set-hostname node-3
+注意：
+	所有节点操作
+```
+
+#### 4.添加本地解析
+
+```shell
+[root@master ~]# cat >> /etc/hosts <<eof
+10.0.0.220 master
+10.0.0.221 node-1
+10.0.0.222 node-2
+10.0.0.223 node-3
+eof
+注意：
+	所有节点操作
+```
+
+#### 5.安装容器
+
+```shell
+[root@master ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
+[root@master ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
+[root@master ~]# yum -y install docker-ce
+[root@master ~]# systemctl start docker
+[root@master ~]# systemctl enable docker
+[root@master ~]# vim /etc/docker/daemon.json
+
+{
+  "exec-opts": ["native.cgroupdriver=systemd"]
+}
+[root@master ~]# systemctl restart docker
+
+[kubelet-check] The HTTP call equal to ‘curl -sSL http://localhost:10248/healthz’ failed with error: Get “http://localhost:10248/healthz”: dial tcp [::1]:10248: connect: connection refused.
+[kubelet-check] It seems like the kubelet isn’t running or healthy.
+————————————————
+版权声明：本文为CSDN博主「看，未来」的原创文章，遵循CC 4.0 BY-SA版权协议，转载请附上原文出处链接及本声明。
+原文链接：https://blog.csdn.net/qq_43762191/article/details/125567365
+注意：
+	所有节点操作
+```
+
+#### 6.安装kubeadm和kubelet
+
+```shell
+[root@master ~]# cat >> /etc/yum.repos.d/kubernetes.repo <<eof
+[kubernetes]
+name=Kubernetes
+baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
+enabled=1
+gpgcheck=0
+repo_gpgcheck=0
+gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
+eof
+[root@master ~]# yum -y install kubeadm  kubelet  kubectl ipvsadm
+注意：
+	所有节点操作
+	这里安装的是最新版本（也可以指定版本号：kubeadm-1.19.4）
+```
+
+#### 7.配置kubelet的cgroups
+
+```shell
+[root@master ~]#　cat >/etc/sysconfig/kubelet<<EOF
+KUBELET_EXTRA_ARGS="--cgroup-driver=cgroupfs --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.1"
+EOF
+k8s.gcr.io/pause:3.6
+```
+
+#### 8.加载内核模块
+
+```shell
+[root@master ~]# modprobe br_netfilter
+注意：
+	所有节点操作
+```
+
+#### 9.修改内核参数
+
+```shell
+[root@master ~]#　cat >> /etc/sysctl.conf <<eof
+net.bridge.bridge-nf-call-ip6tables = 1
+net.bridge.bridge-nf-call-iptables = 1
+vm.swappiness=0
+eof
+[root@master ~]# sysctl -p
+net.bridge.bridge-nf-call-ip6tables = 1
+net.bridge.bridge-nf-call-iptables = 1
+vm.swappiness = 0
+注意：
+	所有节点操作
+```
+
+## 二：部署Kubernetes
+
+#### 1.镜像下载
+
+```shell
+https://www.xingdiancloud.cn/index.php/s/6GyinxZwSRemHPz
+注意：
+	下载后上传到所有节点
+```
+
+#### 2.镜像导入
+
+```shell
+[root@master ~]# cat image_load.sh
+#!/bin/bash
+image_path=`pwd`
+for i in `ls "${image_path}" | grep tar`
+do
+        docker load  < $i
+done
+[root@master ~]# bash image_load.sh
+注意：
+	所有节点操作
+```
+
+#### 3.master节点初始化
+
+```shell
+[root@master ~]# kubeadm init --kubernetes-version=1.23.1 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=10.0.0.220
+
+Your Kubernetes control-plane has initialized successfully!
+
+To start using your cluster, you need to run the following as a regular user:
+
+  mkdir -p $HOME/.kube
+  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
+  sudo chown $(id -u):$(id -g) $HOME/.kube/config
+
+Alternatively, if you are the root user, you can run:
+
+  export KUBECONFIG=/etc/kubernetes/admin.conf
+
+You should now deploy a pod network to the cluster.
+Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
+  https://kubernetes.io/docs/concepts/cluster-administration/addons/
+
+Then you can join any number of worker nodes by running the following on each as root:
+
+kubeadm join 10.0.0.220:6443 --token mzrm3c.u9mpt80rddmjvd3g \
+        --discovery-token-ca-cert-hash sha256:fec53dfeacc5187d3f0e3998d65bd3e303fa64acd5156192240728567659bf4a
+```
+
+#### 4.安装pod插件
+
+```shell
+[root@master ~]# wget http://www.xingdiancloud.cn:92/index.php/s/3Ad7aTxqPPja24M/download/flannel.yaml
+[root@master ~]# kubectl create -f flannel.yaml
+```
+
+#### 5.将node加入工作节点
+
+```shell
+[root@node-1 ~]# kubeadm join 10.0.0.220:6443 --token mzrm3c.u9mpt80rddmjvd3g --discovery-token-ca-cert-hash sha256:fec53dfeacc5187d3f0e3998d65bd3e303fa64acd5156192240728567659bf4a
+注意：
+这里使用的是master初始化产生的token
+这里的token时间长了会改变，需要使用命令获取，见下期内容
+没有记录集群 join 命令的可以通过以下方式重新获取:
+kubeadm token create --print-join-command --ttl=0
+```
+
+#### 6.master节点查看集群状态
+
+```shell
+[root@master ~]# kubectl get nodes
+NAME     STATUS   ROLES                  AGE     VERSION
+master   Ready    control-plane,master   26m     v1.23.1
+node-1   Ready    <none>                 4m45s   v1.23.1
+node-2   Ready    <none>                 4m40s   v1.23.1
+node-3   Ready    <none>                 4m46s   v1.23.1
+```
+
+
+
+
+
+
+
+
+